|
For more than 80 years, Halder has been 'The Original for Professionals', supplying hand tools to tradespeople.
Tracing its roots back to the late 1930s, the company was founded by German engineer Erwin Halder. It began as a small workshop dedicated to producing the SIMPLEX soft-face mallet.
Now with a large catalogue of mallets and hammers under its belt, Halder's German-made products have become renowned for their precision and quality in countries around the world.
Check out some of the products they have to offer in our buying guide below.
|
 |
1) Halder SIMPLEX Mallet with Cast Steel Wooden Handle (HA3027060)
Offering an insert combination of rubber composition / superplastic, the SIMPLEX series 3027 is an indispensable companion for many applications and Halder's top-selling combination. Ultra-low-wear, impact cushioning and odourless, the medium hard rubber insert offers a much longer service life than a conventional rubber hammer.
 |
Features:
- Insert a combination of composite rubber and superplastic black insert
- The Superplastic insert (Series 3207) offers more powerful impact force than the rubber insert
- Medium hard plastic insert 60mm diameter striking faces
- High quality, vibration damping and ergonomically shaped wooden handle
- Cast iron housing with integrated handle protection sleeve provides excellent break resistance
- All parts can be replaced, resulting in great savings in cost and resources
- Use for gardening and landscaping, curbstone setting, masonry and stairs, fence construction, driving steel wedges, scaffold construction, tent construction, carpenter's work, roof framework etc.
- Made in Germany
|
2) Halder SIMPLEX Mallet with Alu Housing TPE-Soft Face White Plastic Inserts 50mm (HA3117050)
The blue TPE-soft insert is the softest insert of the SIMPLEX line and offers strong impact cushioning for work requiring a light touch. Unlike conventional rubber mallets, it does not leave behind any undesired black marring. The superplastic insert allows for a more powerful impact force than the rubber insert.
 |
Features:
- Insert a combination of TPE-Soft (blue) and superplastic (white) nylon (white)
- Striking face is hard, very wear-resistant, chip-resistant to sub-zero temperatures and oil and grease resistant
- Blue rubber striking face is soft and non-marking high-quality, vibration-damping, and ergonomically-shaped
- Wooden handle; ideal for use on materials that break easily
- 50mm striking faces the extra light aluminium housing allow the user to easily apply and control the right amount of impact force
- All parts can be easily replaced, resulting in great savings in cost and resources.
- Applications: joinery, carpentry, furniture assembly, kitchen fitting, natural stones
- Made in Germany
|
3) Halder Supercraft Sledge Hammer with Black Rubber + Red Plastic Inserts 80mm (HA3027081)
The SIMPLEX series 3027 is an indispensable companion for a large number of applications. It is also available in three sledgehammer versions as it is Halder's top-selling combination: the smallest of these versions boasts a head diameter of D60mm, a total weight of 1,810g, and a total length of 70cm.
 |
Features:
- Insert a combination of composite rubber and superplastic black insert
- The superplastic insert allows for a more powerful impact force than the rubber insert
- Medium hard plastic insert 80mm diameter striking faces
- High quality, vibration damping and ergonomically shaped wooden handle
- Cast iron housing with integrated handle protection sleeve provides excellent break resistance
- All parts can be replaced, resulting in great savings in cost and resources
- 80cm in length, the hickory handle can be easily grabbed from a standing position
- Use for gardening and landscaping, curbstone setting, masonry and stairs, fence construction, driving steel wedges, scaffold construction, tent construction, carpenter's work, roof framework etc.
- Made in Germany
|
4) Halder Soft Faced Mallet Non-rebound 30 x 30 Polyurethane (HA3380040)
The SECURAL soft-face mallet is a true specialist for corners and edges thanks to its rectangular inserts. Made of polyurethane, the medium hard inserts are replaceable. Perfectly balanced, the ratio of hammer head mass to shot mass in combination with the cushioning properties of the impact surfaces guarantees maximum rebound dampening.
 |
Features:
- Replaceable, rectangular striking faces
- Medium hard striking faces, dead blow hammer
- Noise-dampening and non-rebound
- Perfectly break-proof connection between hammer head and handle
- Extremely high impact force at low-weight
- Applications: perfect for getting into right angles, floor laying, parquet, laminate, drywall, furniture assembly, joinery, sheet metal, repair work and window fitting
|
5) Halder SIMPLEX Mallet with Copper + Soft Metal Inserts Fibreglass Handle 30mm (HA3749030)
Comprises the insert combination of copper / soft metal. Representing the hardest insert in the SIMPLEX selection, the copper insert produces extremely high impact forces but in a way that is gentler compared to a steel hammer. Made of aluminium, the soft metal insert is softer than the copper insert, heat-resistant and a replacement for a classic lead hammer.
 |
Features:
- SIMPLEX Soft-Face Mallet with the insert combination of copper (hard), soft metal (silver, hard, heat-resistant)
- Reinforced cast iron housing with great stability boosts impact force by adding weight
- Exceptionally rugged and durable fiberglass handle with non-slip grip, inorganic (non-sensitive to moisture)
- All parts can be replaced, resulting in great savings in cost and resources
- 30mm diameter striking faces replace traditional lead and copper hammers
- 2-in-1 straightening work, plant construction, sheet-metal working, assembly and repair work in the automotive and truck sector
|
Shop Halder Hammers at UK Planet Tools
The full range of Halder Hammers is now available in our store. Shop now.
Follow us on:
for more from Halder and other tool brands you love.
