DeWalt DCK853P4 18V XR Cordless Brushless 8 Piece Power Tool Kit With 4 x 5.0Ah Batteries, Dual Port Charger, Toughsystem Tool Boxes & Trolley

DCD996N Combi Drill:

• All metal nitro-carburised chuck prolongs life as it is stronger and rust resistant
• Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations
• 3 speed gearbox for a greater range of applications
• Larger brushless motor than previous model gives up to 34% increase in power
• Improved air flow to the motor keeps it cool under pressure
• Hammer Function increases speed to 2250rpm giving increased productivity
• Super bright base-mounted LED work light with 3 LEDs which give a range from 2.6 to a massive 60 lumens

DCF887N Impact Driver:

• Latest generation 18V XR Li-Ion Brushless Impact Driver.
• 3 Mode Impact selector improves user control.
• Improved Brushless motor provides 28% increased torque.
• 135mm Overall length.
• 3 LED ‘Halo‘ ring provides maximum illumination of work piece
  6.35mm ‘drop and load‘ hex bit holder allows for quick, one handed fitment.
• Aluminium front housing provides greater heat dispersion increasing motor life
• Ergonomic handle and rubber overmold reduces vibration and user fatigue

DCG405N Angle Grinder:

• 18V Brushless motor for efficiency, improved application performance and power
• Capable of x69 cuts in 1/2" steel rebar when used with 5.0Ah battery (sold separately)
• Compact gear case for increased access to tight spaces and gives excellent cutting depth
• Slide switch provides less user fatigue. Built in no-volt release gives protection against accidental start ups when new battery is installed
• Electronic brake has braking time of < 2 seconds when thetrigger is released to help reduce accidental contact and injury
• Constant Clutch and E-Clutch protects from kickbacks, cuts and wheel bursts
• Mesh Covers restricts dust being sucked through the motor
• Ergonomic slim body with rubber over-mould for improved comfort and control
• Two Position Side Handle offers greater comfort and control
  1 or 2 touch guard for quick and easy keyless adjustment

DCS355N Oscillating-Multi Tool:

• Rubber over mould and ergonomic handle design enable comfortable use over extended periods
• A standard motor contains carbon brushes which generate friction, Dewalt XR
• Brushless motor eliminates this wasted energy, maximising the life and runtime of the tool - also delivers up to 57% more run time over brushed motors
• A bright LED Light illuminates dark work surfaces for accurate cutting
• Unique quick change accessory system - tool free & single handed operation
• Universal Accessory Adaptor for use with most oscillating tool accessory brands

DCS367N Reciprocating Saw:

• 18V Brushless motor for improved power and run-time.
• Compact length (363mm), lightweight (3.2kg), ergonomically designed and improved balance allows comfortable and controlled cutting for high user efficiency.
• 4-position blade clamp - allows cutting from angle and improves access to cut making it easy to use in many applications
• Fixed, pivoting shoe for optimum stabilization of cuts ensures better comfort, control and performance.
• Optimum speed/stroke length (28.6mm / 2900SPM) for fast and efficient cutting, enhances productivity saving time and money.
• Variable speed switch gives complete control.
• LED light for better visibility.

DCS570N Circular Saw:

• Scale for precise cutting depth setting to 65 mm
• General-purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials
• High torque Brushless motor for durability and power for cutting job site and joinery materials
• Stable block construction for low-vibration running and long service life
• Additional handle for safe two-handed work
• Variable adjustment of the bevel angle to 57 degrees

DCH273N SDS Plus Drill:

• Category-leading high-speed drilling performance at more than 90 holes (10mm Ø x 80mm) per charge
• Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
• Brushless motor with high capacity XR 5.0Ah 18V Lithium-ion battery platform for extreme runtime and reduced maintenance
• Electronic clutch for consistently-high torque and improved durability
• Perform & Protect: best-in-class vibration at 6.6m/s², minimising user fatigue
• Bright white LED with delay feature improves visibility
• Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm
• Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods

DCL050 Hanheld LED Light:

• Compact 300w motor delivers 0-20,000 oscillations per minute, providing faster completion of the most demanding tasks
• Variable speed control and dual grip position allows for a simple soft start function, and better application control
• Rubber over mould and ergonomic handle design enable comfortable use over extended periods
• A bright LED Light illuminates dark work surfaces for accurate cutting
• Unique quick change accessory system - tool free & single handed operation

Product Specifications:

DCD996N Combi Drill:

• Power Output (W): 830
• Soft Application Max Torque (Nm): 66
• Hard Application Max Torque (Nm): 95
• Torque Settings: 11 + Drill
• No. of Gears: 3
• No Load Speed (RPM) High: 0 - 2250
• No Load Speed (RPM) Med: 0 - 1500
• No Load Speed (RPM) Low: 0 - 500
• Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
• Chuck Capacity (mm): 1.5 - 13.0
• Drill Capacity: Concrete (mm): 13
• Drill Capacity: Metal (mm): 15
• Drill Capacity: Wood (mm): 55
• Impact Rate (BPM) High: 0 - 38250
• Impact Rate (BPM) Med: 0 - 25500
• Impact Rate (BPM) Low: 0 - 8600
• Overall Length (mm): 213

DCF887N Impact Driver:

• Max Torque: 205 Nm
• Battery Compatibility: 18v Lithium-Ion (XR)
• No Load Speed: 0-3250 rpm
• Standard Bolt Capacity: M4-M12
• Max. Impacts Per Min: 0-3800 ipm
• Driving Shank: 1/4" Hex
• Overall Length: 134 mm

DCG405N Angle Grinder:

• Power Input: 1000 Watts
• Power Output: 800 Watt
• No Load Speed: 9000 rpm
• Max. Disc Diameter: 125 mm
• Bore Diameter:
• Spindle Thread: M14
• Length: 310 mm

DCS355N Oscillating-Multi Tool:

• Power Output: 300 W
• Voltage: 18v
• No Loads Speed: 0-20,000 opm
• Length: 310mm
• Oscillating Angle: 1.6°
• Variable Speed: Yes
• LED Light: Yes

DCS367N Reciprocating Saw:

• No Load Stroke Rate: 0-2900 spm
• Stroke Length: 28.6 mm
• Max Cutting Capacity Wood: 300 mm
• Max Cutting Capacity Steel Sections & Pipes: 100 mm
• Max Cutting Capacity PVC: 160 mm
• Length: 363 mm
• Height: 203 mm

DCS570N Circular Saw:

• No Load Speed: 5500 rpm
• Blade Diameter: 184 mm
• Blade Bore: 16 mm
• Bevel Capacity: 57 °
• Max. Depth of Cut at 90º: 64 mm

DCH273N SDS Plus Drill:

• Chuck Type: SDS+ Plus
• Drilling Modes: Rotary, Rotary Hammer & Chiselling
• Speed Control: Variable Speed
• Impact Energy: 2.1j
• Blows Per Minute: 4500
• Max Bit Capacity in Wood: 26 mm
• Max Bit Capacity in Metal: 13 mm
• Max Bit Capacity in Concrete: 20 mm
• No Load Speed: 1200 rpm

DCL050 Hanheld LED Light:

• Bulb Type: LED
• Light Output: 250-500 lm
• Protection Class: IP54
• Height: 345 mm
• Length: 95 mm